Featured Insights
The Challenge of Measuring a 40 µohm, 2000 Amp PDN With a 2-Port Probe: How Much CMRR is Needed?
Benjamin Dannan, Signal Edge Solutions and Steve Sandler, Picotest Published in Signal Integrity Journal A two-part series of posts, firstly determining how much CMRR is needed…
Picotest Pocket TDR Fills Important Niche
A time domain reflectometer (TDR) is generally a large, expensive benchtop instrument that measures impedance, PCB coupons, dielectric constants, PCB signal traces, interconnects, connectors,…
Picotest Releases Line of High-Speed Transient Load Steppers for VRM and PDN Validation
In a major technological leap, Picotest, maker of custom test equipment for power integrity and power systems testing, has released a series of very…
-
How To Measure 3-Port Impedance with Picotest Products
The accurate measurement of impedance in electronic systems is crucial for ensuring stability, reliability, and performance. Among various techniques, 3-port impedance testing stands out…
-
Ultra-Low Impedance Measurement: Testing and Optimizing with the J2114A
Ultra-Low Impedance Measurement: Testing and Optimizing with the J2114A – High CMRR Isolation Amplifier – Ground Loop Breaker Testing ultra-low impedance is critical to…
-
Achieving Better Energy Efficiency in AI Data Centers With Power Integrity Testing
Introduction Deployment of AI-based technology is happening in the Data Center. The processor-intensive servers are driving up energy demands. The table below illustrates the…
-
Ferrites in PCB Design: What the Experts Say
“The best time to use a ferrite is never” Are you curious about the role of ferrite beads in PCB design? A thread posted…
-
Ultra-low Impedance Testing Using the 2-Port Shunt-Through Measurement Technique
Ultra-low Impedance Testing Using the 2-Port Shunt-Through Measurement Technique Measuring ultra-low impedances (20 micro-ohm) is a challenge for any power distribution network (PDN) design…
-
Power Integrity Testing Requirements Introduce Extreme Interconnect Measures
Power Integrity (PI) engineers are familiar with the ground shield effect in the 2-port shunt through measurement. If not, there are many papers, articles,…
-
Low Noise Power Integrity Measurements – A Guide to Effective Probing with the MXO58 Oscilloscope
In this blog, we will examine the noise performance of various probing solutions with a Rohde & Schwarz (R&S) MXO 5 oscilloscope. The goal…
-
“Probing” the Future of Power Integrity Test and Measurement
The future of power integrity is being affected by power-hungry AI accelerators and other high-performance chips. Learn how Picotest is trying to tackle the…
-
PDN Impedance Measurements Using Bode 500 and Picotest PDN Probes
Download or watch the presentation from Florian Hämmerle of OMICRON Lab at this year’s 13th Power Analysis & Design Symposium. The power delivery network…
-
How To Video – 2-Port Shunt Through Impedance Calibration with Bode 100 and P2102A
This video provides a step-by-step tutorial on setting up and calibrating a 2-port shunt through impedance measurement using the Bode 100, Picotest P2102A 2-port…
-
Picotest 2-port Probe Impedance Measurements
Learn how Brian Hostetler from HPE, Inc explains the measurements made on a few different power rails on a printed circuit board (PCB) assembly.…
-
ROHDE&SCHWARZ Power Integrity Demo
In this demonstration led by Mike Schnecker, Business Development Manager at Rohde & Schwarz, the focus is on showcasing the intricate relationship between power…