Detailed Specifications

Characteristic	Rating
Uncalibrated Insertion Loss	< 100MHz 1dB. >100MHz – 500MHz 3dB
Input Return Loss (typical)	< 100MHz < -20dB >100MHz – 500MHz 12dB
Output Return Loss (typical)	< 100MHz < -20dB >100MHz – 500MHz 12dB
Gain	1
Out to Out Isolation	>75 dB (up to 100MHz)
Maximum Input Voltage	2Vpk DC+AC
Temperature Range	0-50C
Maximum Altitude	6000 Ft
Absolute Maximum Voltage (input or output)	2.5V pk DC+AC into 50Ohms

Caution
To avoid equipment damage and/or severe injuries or death ensure that the absolute maximum ratings are observed and not exceeded at all times.

Model	Description	Price
J2161A	J2161A 2-Way Wideband Active Splitter	$1,995.00 Add to Cart
J2102B-BNC	J2102B Common Mode Transformer – BNC Connectors	$799.00 Add to Cart
J2102B-N	J2102B Common Mode Transformer – N Connectors	$799.00 Add to Cart

Now you can perform the “Gold Standard” PDN measurement on the Tektronix Series 6 oscilloscope. The 2-port shunt-through impedance measurement is enabled by the Picotest J2161A Active Splitter, along with either a J2102B Common Mode Transformer or a J2113A Differential Amplifier (for ground loop breaking). The combination of these two injectors (splitter and transformer) allows you to measure low impedances over frequency down to 1mohm covering a bandwidth of 100Hz to over 500MHz. The bandwidth of the measurement is dependent on the scope’s capabilities.