Products  |  News  |  Publications  |  Training  |  Support  |  About Us  |  Buy Now                                                            Register For Free Online Publications
Products > Power Integrity Station - Bode 100
NEW Non-Invasive Measurement Information
Power Integrity Station - PWR100
Power Integrity Station


Picotest Full Product Brochure
Features & Benefits:
  • Full Featured VNA measures low frequency PDN impedance
    (up to 40MHZ)
  • Specialized Signal and EMI Probes make loadstep and impedance
    testing easier
  • Specialized Injectors enable power supply measurements
  • New Harmonic Injector Supercharges your Spectrum Analyzer

POWER INTEGRITY BUNDLE INCLUDES:

  • OMICRON Lab Bode 100 Vector Network Analyzer
  • 1-Port and 2-Port 1 GHz 50 ohm Tranmission Line PDN Probes
  • Signal Injectors, DC Blocks, Common Mode Transformer
  • Impedance Adapters
  • High Performance Cable and Connector Kit
  • Power Integrity Training: VRTS3 Kit and Power Integrity Text Book
  • EMI Bundle Option
    • EMI Probes with Low Noise Amplifier
    • Harmonic Comb Injector

Compare the Value Against Competing Instruments. Sometimes $14,000 buys you a lot of capability and sometimes it doesn’t!

 

 

  • Product Information
Model Description Price  
PWR100 Power Integrity Station Bode 100 (Regularly $18,165)
$14,000.00
PWR100B Power Integrity Station Bundle Bode 100 (does not include OL000100 or OL000152/OL000153) (Regularly $8,062)
$7,659.00
PWR100-OPT01 EMI Option, may be added to PWR100 or PWR100B (Regularly $3,890)
$3,500.00
Includes Description Individual Price  
OL000100 Bode 100 Vector Network Analyzer (included with PWR100 only) includes NISM
$5,490.00
INJB03 INJB03 Injector Bundle #3 (Includes J2111A Current Injector, J2101A Injection Transformer 10Hz - 45MHz, J2120A Line Injector, J2140A Attenuator, J2170A High PSRR Power Adapter, User manual, 1 Year Warranty
$2,500.00
J2102A J2102A Common Mode Transformer
$525.00
P21B01 PDN Probe Bundle (1 Port and 2 Port Probes), Accessory Kit, Two P2130A DC Blockers
$3,495.00
OL000152/OL000153 B-SMC and B-WIC Impedance Adapters
$1,248.00
PCK01 High Performance Cable and Connector Kit
$999.00
TRN002 Power Integrity Text Book, VRTS3 Distributed System Demo Board, VRTS1.5 Voltage Regulator Test Standard
$543.00
EMI Bundle Option Description Individual Price  
EMIB01 EMI Probes / J2180A Amplifier Bundle
$2,995.00
J2150A Harmonic Comb Injector
$895.00
PWR100B Options Description Individual Price  
OL000152/OL000153 B-SMC and B-WIC Impedance Adapters
$1,248.00

In modern electronic systems, the performance of FPGAs, CPUs, and other high-speed logic devices depends on the power distribution networks or PDNs that power these devices. Within these PDNs, power converters in the form of point-of-load regulators (POLs), voltage regulator modules (VRMs), dc-dc converters, and linear regulators play a crucial role. Yet, many engineers who develop these power converters don’t have the proper equipment to test stability and may be unfamiliar with PDN concepts. The Power Integrity Station includes everything you need to troubleshoot and solve the toughest PDN challenges.

Whether you are testing impedance, stability, transient steploading or EMI, the Power Integrity Station provides you with the state-of-the-art equipment and training necessary to tackle tests you NEED to perform.
Specifications
Output Ratings (@ 0°C ~ 40°C) (P9610A/P9611A)
Voltage: 0 to 36 V / 0 to 60 V³ (P9611A)
Current: 0 to 7 A / 0 to 6 A (P9611A)
Programming Accuracy¹ 1 Year (@ 25°C ±5°C), (% of Output + Offset)
Voltage: 0.05% + 10 mV
Current: 0.2% + 10 mA
Read-Back Accuracy¹ 1 Year (over USB or front panel with respect to actual output (@ 25°C ±5°C),
(% of Output + Offset)
Voltage: 0.05% + 5 mV
Current: 0.15% + 5 mA
Ripple and Noise (with outputs ungrounded, or either output terminal grounded, 20 Hz to 20 MHz
Voltage: < 0.35 mVrms / < 0.5 mVrms (P9611A)
< 2 mV p-p / < 3 mV p-p (P9611A)
Current: < 2 mArms
Common Mode Current: < 1.5 μArms
Load Regulation ±(% of Output + Offset)
Change in output voltage or current for any load change within ratings.
Voltage: < 0.01 % + 2 mV
Current: < 0.01 % + 250 μA
Line Regulation ±(% of Output + Offset)
Change in output voltage or current for any load change within ratings.
Voltage: 0.01 % + 2 mV
Current: 0.01% + 250μA
Programming Resolution
Voltage: 1 mV
Current: 0.21 mA / 1 mA (P9611A)
Read-Back Resolution
Voltage: 1 mV
Current: 0.1 mA / 0.21 mA (P9611A)
Meter Resolution
Voltage: 1 mV / 10 mV (P9611A)
Current: 0.1 mA / 1 mA (P9611A)
Transient Response Time
Less than 30/50 usec for output recover to within 15 mV following a change in output current from full load to half load or vice versa.
Command Processing Time via GPIB
Read-Back Commands: Maximum time to read-back output by MEASure? commands < 20 ms
Output Programming Range (maximum programmable values)
Voltage: 0 to 37.8 V / 0 to 60 V (P9611A)
Current: 0 to 7.35 A / 0 to 6 A (P9611A)
Temperature Coeffiecient ±(% of Output + Offset)
Maximum change in output / read-back per °C after a 30-minute warm-up.
Voltage: 0.01 % + 3 mV / 0.01 % + 10 mV (P9611A)
Current: 0.02 % + 3 mA
Stability (% of Output + Offset)
Maximum change in output / read-back per °C after a 30-minute warm-up.
Voltage: 0.02 % + 1 mV / 0.05 % + 10 mV (P9611A)
Current: 0.1 % + 1 mA / 0.15 % + 2 mA (P9611A)
Voltage Programming Speed
Maximum time required for output voltage to settle within 1 % of its total excursion (for resistive load). Excludes command processing time.
Full Load Up (0V ~ 36V): < 40 ms / (0V~60V): < 100 ms (P9611A)
Full Load Down (36V ~ 0V): < 40 ms / (60V~0V): < 50 ms (P9611A)
No Load Up (0V ~ 36V): < 20 ms / (0V~60V): < 35 ms (P9611A)
No Load Down (36V ~ 0V): < 400 ms / (60V~0V): < 500 ms (P9611A)


General Specifications²
Item Limitation & Description
Power Supply: 100V ~ 120V (115V Range)
220V ~ 240V (230V Range)
Power Line (Hz): 47Hz ~ 63Hz
Interfaces: USB & GPIB
Power Consumption: 400VA Maximum
Size & Weight for Rack (WxHxD): 214.6 x 88.6 x 280 mm, < 2500 g (5.5 Lbs)

1. The accuracy specifications are gained under 1-hour warm-up condition and the calibration at 25°C.
2. For more information, please check the user's manual.
3. The red supplements are the P9611A's specifications. If there is no red, the specs. are the same as the P9610A's.

The specifications are subject to change without notice due to design improvements.

Question: Why buy a refurbished E3632A when you can get a new superior yet compatible P9610/P9611A at a lower price with a 3 year warranty?

PICOTEST POWER SUPPLY COMPARISON SHEET
Function Model P9610A Model P9611A Model E3632A
VA Power 108W 150W 120W
Linear/Switch/Mixed Mixed Mixed Linear
Single Output Yes Yes Yes
Autoranging Yes Yes No, two ranges
Output
Voltage & Current
0 to 36 V
0 to 7 A
0 to 60 V
0 to 6 A
0 to 15V/7A
0 to 30V/4A
Transient Response < 30 μs < 50 μs < 50 μs
Ripple & Noise Voltage
(20Hz to 20MHz)
< 0.35 mVrms
< 2 mVp-p
< 0.50 mVrms
< 3 mVp-p
< 0.35 mVrms
< 2 mVp-p
Ripple & Noise Current &
Common Mode Current
< 2 mArms
< 1.5 uArms
< 2 mArms
< 1.5 uArms
< 2 mArms
< 1.5 uArms
Master-Slave Control Yes No No
Remote Sensing Yes No Yes
Programming Accuracy
Voltage & Current
0.05% + 10 mV
0.2% + 10 mA
0.05% + 10 mV
0.2% + 10 mA
0.05% + 10 mV
0.2% + 10 mA
Read-Back Accuracy
Voltage & Current
0.05% + 5 mV
0.15% + 5 mA
0.05% + 5 mV
0.15% + 5 mA
0.05% + 5 mV
0.15% + 5 mA
Programming Resolution
Voltage & Current
1 mV
0.21 mA
1 mV
1 mA
1 mV
0.5 mA
Read-Back Resolution
Voltage & Current
1 mV
0.1 mA
1 mV
0.21 mA
0.5 mV
0.1 mA
Meter Resolution
Voltage & Current
1 mV
0.1 mA
10 mV
1 mA
1 mV
1 mA
Output Programming
Range (Voltage & Current)
0 to 37.8 V
0 to 7.35 A
0 to 60 V
0 to 6 A
0 to 15.45V/7.21A
0 to 30.9V/4.12A
Stability
(Voltage & Current)
0.02 % + 1 mV
0.1 % + 1mA
0.05 % + 10 mV
0.15 % + 2 mA
0.02 % + 1 mV
0.1 % + 1mA
Short-Withstood Circuit Yes Yes Fair, weaken power
Sequencing Mode Yes Yes No
OVP/OCP/OTP Yes Yes No OTP
Optical Knob Yes Yes No
No Shorting Bar Yes Yes No
Front & Rear Bumper Yes Optional ($15) Yes
USB or USB/GPIB Interfaces Optional ($25/$95) Optional ($25/$95) Yes
Size & Weight 21.5*8.9*28 cm, < 2.5 Kgs 21.5*8.9*28 cm, < 2.5 Kgs 21.3*13.3*34.8cm, 9.5 Kgs
Voltage Programming Speed
Full Load Up (0V~36V) (0V~60V) (0V~30V)
< 40 ms < 100 ms 50 ms
Full Load Down (36V~0V) (60V~0V) (30V~0V)
< 40 ms < 50 ms 45 ms
No Load Up (0V~36V) (0V~60V) (0V~30V)
< 20 ms < 35 ms 20 ms
No Load Down (36V~0V) (60V~0V) (30V~0V)
< 400 ms < 500 ms 400 ms