Products  |  News  |  Publications  |  Training  |  Support  |  About Us  |  Buy Now                                                            Register For Free Online Publications
Products > Power Integrity Station - SSA/RSA Bundle
NEW Non-Invasive Measurement Information
Power Integrity Station Bundles - PWRSSA
Power Integrity Station
KEY FEATURES:
  • Enables Power Integrity Testing
  • Supports EMI/EMC Testing
  • Supports Power Distribution Network Assessment
  • Directly Measure Low Level Noise Density
  • Identify Active and Potential Jitter Sources

POWER INTEGRITY BUNDLE INCLUDES:

  • 1-Port 1 GHz 50 ohm Transmission Line PDN Probe
  • High Performance Cable and Connector Kit
  • Power Integrity Training: VRTS3 Kit and Power Integrity Book
  • EMI Probes and J2180A Amplifier
  • J2150A Harmonic Comb Injector

Getting the Most Out of Your E5052A/B and N9020A Signal Analyzers

 

 

  • Product Information
Model Description Price  
PWRSSA Power Integrity Bundle for the Keysight N9020A or E5052A/B (Regularly $6,772)
$6,495.00
PWR5061B Includes Description Individual Price  
P2100A 1 Port 50 ohm Transmission Line PDN Probe, Accessory Kit, One P2130A DC Blocker
$1,495.00
PCK01 High Performance Cable and Connector Kit
$999.00
TRN001 VRTS3 Distributed System Demo Board, Power Integrity Text Book
$388.00
EMIB01 EMI Probes / J2180A Amplifier Bundle
$2,995.00
J2150A Harmonic Comb Injector
$895.00

The Picotest Power Integrity SSA Bundle includes all of the accessories you need to super charge your spectrum analyzer supporting EMI/EMC assessment and troubleshooting, jitter source sensitivity and spur identification as well as direct noise and noise density measurement.

Specifications
Output Ratings (@ 0°C ~ 40°C) (P9610A/P9611A)
Voltage: 0 to 36 V / 0 to 60 V³ (P9611A)
Current: 0 to 7 A / 0 to 6 A (P9611A)
Programming Accuracy¹ 1 Year (@ 25°C ±5°C), (% of Output + Offset)
Voltage: 0.05% + 10 mV
Current: 0.2% + 10 mA
Read-Back Accuracy¹ 1 Year (over USB or front panel with respect to actual output (@ 25°C ±5°C),
(% of Output + Offset)
Voltage: 0.05% + 5 mV
Current: 0.15% + 5 mA
Ripple and Noise (with outputs ungrounded, or either output terminal grounded, 20 Hz to 20 MHz
Voltage: < 0.35 mVrms / < 0.5 mVrms (P9611A)
< 2 mV p-p / < 3 mV p-p (P9611A)
Current: < 2 mArms
Common Mode Current: < 1.5 μArms
Load Regulation ±(% of Output + Offset)
Change in output voltage or current for any load change within ratings.
Voltage: < 0.01 % + 2 mV
Current: < 0.01 % + 250 μA
Line Regulation ±(% of Output + Offset)
Change in output voltage or current for any load change within ratings.
Voltage: 0.01 % + 2 mV
Current: 0.01% + 250μA
Programming Resolution
Voltage: 1 mV
Current: 0.21 mA / 1 mA (P9611A)
Read-Back Resolution
Voltage: 1 mV
Current: 0.1 mA / 0.21 mA (P9611A)
Meter Resolution
Voltage: 1 mV / 10 mV (P9611A)
Current: 0.1 mA / 1 mA (P9611A)
Transient Response Time
Less than 30/50 usec for output recover to within 15 mV following a change in output current from full load to half load or vice versa.
Command Processing Time via GPIB
Read-Back Commands: Maximum time to read-back output by MEASure? commands < 20 ms
Output Programming Range (maximum programmable values)
Voltage: 0 to 37.8 V / 0 to 60 V (P9611A)
Current: 0 to 7.35 A / 0 to 6 A (P9611A)
Temperature Coeffiecient ±(% of Output + Offset)
Maximum change in output / read-back per °C after a 30-minute warm-up.
Voltage: 0.01 % + 3 mV / 0.01 % + 10 mV (P9611A)
Current: 0.02 % + 3 mA
Stability (% of Output + Offset)
Maximum change in output / read-back per °C after a 30-minute warm-up.
Voltage: 0.02 % + 1 mV / 0.05 % + 10 mV (P9611A)
Current: 0.1 % + 1 mA / 0.15 % + 2 mA (P9611A)
Voltage Programming Speed
Maximum time required for output voltage to settle within 1 % of its total excursion (for resistive load). Excludes command processing time.
Full Load Up (0V ~ 36V): < 40 ms / (0V~60V): < 100 ms (P9611A)
Full Load Down (36V ~ 0V): < 40 ms / (60V~0V): < 50 ms (P9611A)
No Load Up (0V ~ 36V): < 20 ms / (0V~60V): < 35 ms (P9611A)
No Load Down (36V ~ 0V): < 400 ms / (60V~0V): < 500 ms (P9611A)


General Specifications²
Item Limitation & Description
Power Supply: 100V ~ 120V (115V Range)
220V ~ 240V (230V Range)
Power Line (Hz): 47Hz ~ 63Hz
Interfaces: USB & GPIB
Power Consumption: 400VA Maximum
Size & Weight for Rack (WxHxD): 214.6 x 88.6 x 280 mm, < 2500 g (5.5 Lbs)

1. The accuracy specifications are gained under 1-hour warm-up condition and the calibration at 25°C.
2. For more information, please check the user's manual.
3. The red supplements are the P9611A's specifications. If there is no red, the specs. are the same as the P9610A's.

The specifications are subject to change without notice due to design improvements.

Question: Why buy a refurbished E3632A when you can get a new superior yet compatible P9610/P9611A at a lower price with a 3 year warranty?

PICOTEST POWER SUPPLY COMPARISON SHEET
Function Model P9610A Model P9611A Model E3632A
VA Power 108W 150W 120W
Linear/Switch/Mixed Mixed Mixed Linear
Single Output Yes Yes Yes
Autoranging Yes Yes No, two ranges
Output
Voltage & Current
0 to 36 V
0 to 7 A
0 to 60 V
0 to 6 A
0 to 15V/7A
0 to 30V/4A
Transient Response < 30 μs < 50 μs < 50 μs
Ripple & Noise Voltage
(20Hz to 20MHz)
< 0.35 mVrms
< 2 mVp-p
< 0.50 mVrms
< 3 mVp-p
< 0.35 mVrms
< 2 mVp-p
Ripple & Noise Current &
Common Mode Current
< 2 mArms
< 1.5 uArms
< 2 mArms
< 1.5 uArms
< 2 mArms
< 1.5 uArms
Master-Slave Control Yes No No
Remote Sensing Yes No Yes
Programming Accuracy
Voltage & Current
0.05% + 10 mV
0.2% + 10 mA
0.05% + 10 mV
0.2% + 10 mA
0.05% + 10 mV
0.2% + 10 mA
Read-Back Accuracy
Voltage & Current
0.05% + 5 mV
0.15% + 5 mA
0.05% + 5 mV
0.15% + 5 mA
0.05% + 5 mV
0.15% + 5 mA
Programming Resolution
Voltage & Current
1 mV
0.21 mA
1 mV
1 mA
1 mV
0.5 mA
Read-Back Resolution
Voltage & Current
1 mV
0.1 mA
1 mV
0.21 mA
0.5 mV
0.1 mA
Meter Resolution
Voltage & Current
1 mV
0.1 mA
10 mV
1 mA
1 mV
1 mA
Output Programming
Range (Voltage & Current)
0 to 37.8 V
0 to 7.35 A
0 to 60 V
0 to 6 A
0 to 15.45V/7.21A
0 to 30.9V/4.12A
Stability
(Voltage & Current)
0.02 % + 1 mV
0.1 % + 1mA
0.05 % + 10 mV
0.15 % + 2 mA
0.02 % + 1 mV
0.1 % + 1mA
Short-Withstood Circuit Yes Yes Fair, weaken power
Sequencing Mode Yes Yes No
OVP/OCP/OTP Yes Yes No OTP
Optical Knob Yes Yes No
No Shorting Bar Yes Yes No
Front & Rear Bumper Yes Optional ($15) Yes
USB or USB/GPIB Interfaces Optional ($25/$95) Optional ($25/$95) Yes
Size & Weight 21.5*8.9*28 cm, < 2.5 Kgs 21.5*8.9*28 cm, < 2.5 Kgs 21.3*13.3*34.8cm, 9.5 Kgs
Voltage Programming Speed
Full Load Up (0V~36V) (0V~60V) (0V~30V)
< 40 ms < 100 ms 50 ms
Full Load Down (36V~0V) (60V~0V) (30V~0V)
< 40 ms < 50 ms 45 ms
No Load Up (0V~36V) (0V~60V) (0V~30V)
< 20 ms < 35 ms 20 ms
No Load Down (36V~0V) (60V~0V) (30V~0V)
< 400 ms < 500 ms 400 ms