Products  |  News  |  Publications  |  Training  |  Support  |  About Us  |  Buy Now                                                            Register For Free Online Publications
Products > Power Integrity Station - Oscilloscopes
NEW Non-Invasive Measurement Information
Power Integrity Station - PWRSCOPE
Power Integrity Station


KEY FEATURES:
  • Enables Power Integrity Testing
  • Supports Load Step, PSRR, Stability, Impedance and PDN Assessments
  • Specialized Handheld Browser Probes make testing easier
  • Comb Generator and Probes Enhances your EMI/EMC Testing

POWER INTEGRITY BUNDLE INCLUDES:

  • 1-Port and 2-Port 1 GHz 50 ohm Tranmission Line PDN Probes
  • Signal Injectors, Line and Current Injectors, Injection Transformer
  • EMI Bundle - Comb Generator, Probes and Amplifier
  • High Performance Cable and Connector Kit
  • Power Integrity Training: VRTS3/VRTS1.5 Kits and Power Integrity Text Book

 

 

 

  • Product Information
Model Description Price  
PWRSCOPE Power Integrity Station for Oscilloscopes (Regularly $11,427)
$10,995.00
Includes Description Individual Price  
INJB03 INJB03 Injector Bundle #3 (Includes J2111A Current Injector, J2101A Injection Transformer 10Hz - 45MHz, J2120A Line Injector, J2140A Attenuator, J2170A High PSRR Power Adapter, User manual, 1 Year Warranty
$2,500.00
P21B01 PDN Probe Bundle (1 Port and 2 Port Probes), Accessory Kit, Two P2130A DC Blockers
$3,495.00
PCK01 High Performance Cable and Connector Kit
$999.00
TRN002 Power Integrity Text Book, VRTS3 Distributed System Demo Board, VRTS1.5 Voltage Regulator Test Standard
$543.00
EMIB01 EMI Probes / J2180A Amplifier Bundle
$2,995.00
J2150A Harmonic Comb Injector
$895.00

The Picotest Power Integrity Station Bundle for Oscilloscopes upgrades your scope enabling it to perform a wider variety of measurements including stability, PSRR, transient step load and EMI troubleshooting.

Specifications
Output Ratings (@ 0°C ~ 40°C) (P9610A/P9611A)
Voltage: 0 to 36 V / 0 to 60 V³ (P9611A)
Current: 0 to 7 A / 0 to 6 A (P9611A)
Programming Accuracy¹ 1 Year (@ 25°C ±5°C), (% of Output + Offset)
Voltage: 0.05% + 10 mV
Current: 0.2% + 10 mA
Read-Back Accuracy¹ 1 Year (over USB or front panel with respect to actual output (@ 25°C ±5°C),
(% of Output + Offset)
Voltage: 0.05% + 5 mV
Current: 0.15% + 5 mA
Ripple and Noise (with outputs ungrounded, or either output terminal grounded, 20 Hz to 20 MHz
Voltage: < 0.35 mVrms / < 0.5 mVrms (P9611A)
< 2 mV p-p / < 3 mV p-p (P9611A)
Current: < 2 mArms
Common Mode Current: < 1.5 μArms
Load Regulation ±(% of Output + Offset)
Change in output voltage or current for any load change within ratings.
Voltage: < 0.01 % + 2 mV
Current: < 0.01 % + 250 μA
Line Regulation ±(% of Output + Offset)
Change in output voltage or current for any load change within ratings.
Voltage: 0.01 % + 2 mV
Current: 0.01% + 250μA
Programming Resolution
Voltage: 1 mV
Current: 0.21 mA / 1 mA (P9611A)
Read-Back Resolution
Voltage: 1 mV
Current: 0.1 mA / 0.21 mA (P9611A)
Meter Resolution
Voltage: 1 mV / 10 mV (P9611A)
Current: 0.1 mA / 1 mA (P9611A)
Transient Response Time
Less than 30/50 usec for output recover to within 15 mV following a change in output current from full load to half load or vice versa.
Command Processing Time via GPIB
Read-Back Commands: Maximum time to read-back output by MEASure? commands < 20 ms
Output Programming Range (maximum programmable values)
Voltage: 0 to 37.8 V / 0 to 60 V (P9611A)
Current: 0 to 7.35 A / 0 to 6 A (P9611A)
Temperature Coeffiecient ±(% of Output + Offset)
Maximum change in output / read-back per °C after a 30-minute warm-up.
Voltage: 0.01 % + 3 mV / 0.01 % + 10 mV (P9611A)
Current: 0.02 % + 3 mA
Stability (% of Output + Offset)
Maximum change in output / read-back per °C after a 30-minute warm-up.
Voltage: 0.02 % + 1 mV / 0.05 % + 10 mV (P9611A)
Current: 0.1 % + 1 mA / 0.15 % + 2 mA (P9611A)
Voltage Programming Speed
Maximum time required for output voltage to settle within 1 % of its total excursion (for resistive load). Excludes command processing time.
Full Load Up (0V ~ 36V): < 40 ms / (0V~60V): < 100 ms (P9611A)
Full Load Down (36V ~ 0V): < 40 ms / (60V~0V): < 50 ms (P9611A)
No Load Up (0V ~ 36V): < 20 ms / (0V~60V): < 35 ms (P9611A)
No Load Down (36V ~ 0V): < 400 ms / (60V~0V): < 500 ms (P9611A)


General Specifications²
Item Limitation & Description
Power Supply: 100V ~ 120V (115V Range)
220V ~ 240V (230V Range)
Power Line (Hz): 47Hz ~ 63Hz
Interfaces: USB & GPIB
Power Consumption: 400VA Maximum
Size & Weight for Rack (WxHxD): 214.6 x 88.6 x 280 mm, < 2500 g (5.5 Lbs)

1. The accuracy specifications are gained under 1-hour warm-up condition and the calibration at 25°C.
2. For more information, please check the user's manual.
3. The red supplements are the P9611A's specifications. If there is no red, the specs. are the same as the P9610A's.

The specifications are subject to change without notice due to design improvements.

Question: Why buy a refurbished E3632A when you can get a new superior yet compatible P9610/P9611A at a lower price with a 3 year warranty?

PICOTEST POWER SUPPLY COMPARISON SHEET
Function Model P9610A Model P9611A Model E3632A
VA Power 108W 150W 120W
Linear/Switch/Mixed Mixed Mixed Linear
Single Output Yes Yes Yes
Autoranging Yes Yes No, two ranges
Output
Voltage & Current
0 to 36 V
0 to 7 A
0 to 60 V
0 to 6 A
0 to 15V/7A
0 to 30V/4A
Transient Response < 30 μs < 50 μs < 50 μs
Ripple & Noise Voltage
(20Hz to 20MHz)
< 0.35 mVrms
< 2 mVp-p
< 0.50 mVrms
< 3 mVp-p
< 0.35 mVrms
< 2 mVp-p
Ripple & Noise Current &
Common Mode Current
< 2 mArms
< 1.5 uArms
< 2 mArms
< 1.5 uArms
< 2 mArms
< 1.5 uArms
Master-Slave Control Yes No No
Remote Sensing Yes No Yes
Programming Accuracy
Voltage & Current
0.05% + 10 mV
0.2% + 10 mA
0.05% + 10 mV
0.2% + 10 mA
0.05% + 10 mV
0.2% + 10 mA
Read-Back Accuracy
Voltage & Current
0.05% + 5 mV
0.15% + 5 mA
0.05% + 5 mV
0.15% + 5 mA
0.05% + 5 mV
0.15% + 5 mA
Programming Resolution
Voltage & Current
1 mV
0.21 mA
1 mV
1 mA
1 mV
0.5 mA
Read-Back Resolution
Voltage & Current
1 mV
0.1 mA
1 mV
0.21 mA
0.5 mV
0.1 mA
Meter Resolution
Voltage & Current
1 mV
0.1 mA
10 mV
1 mA
1 mV
1 mA
Output Programming
Range (Voltage & Current)
0 to 37.8 V
0 to 7.35 A
0 to 60 V
0 to 6 A
0 to 15.45V/7.21A
0 to 30.9V/4.12A
Stability
(Voltage & Current)
0.02 % + 1 mV
0.1 % + 1mA
0.05 % + 10 mV
0.15 % + 2 mA
0.02 % + 1 mV
0.1 % + 1mA
Short-Withstood Circuit Yes Yes Fair, weaken power
Sequencing Mode Yes Yes No
OVP/OCP/OTP Yes Yes No OTP
Optical Knob Yes Yes No
No Shorting Bar Yes Yes No
Front & Rear Bumper Yes Optional ($15) Yes
USB or USB/GPIB Interfaces Optional ($25/$95) Optional ($25/$95) Yes
Size & Weight 21.5*8.9*28 cm, < 2.5 Kgs 21.5*8.9*28 cm, < 2.5 Kgs 21.3*13.3*34.8cm, 9.5 Kgs
Voltage Programming Speed
Full Load Up (0V~36V) (0V~60V) (0V~30V)
< 40 ms < 100 ms 50 ms
Full Load Down (36V~0V) (60V~0V) (30V~0V)
< 40 ms < 50 ms 45 ms
No Load Up (0V~36V) (0V~60V) (0V~30V)
< 20 ms < 35 ms 20 ms
No Load Down (36V~0V) (60V~0V) (30V~0V)
< 400 ms < 500 ms 400 ms